Ankersmid Peltier Cooler APC
__Version APC 30X Series
Ankersmid Peltier Coolers are used to lower the dew point of humid gas to avoid condensate entering into the gas analyser.
A good and stable gas dew point avoids cross-interference if the analyser is sensitive to H2O.
This unique microprocessor controlled Peltier Cooler has been designed with a powerful dew point stabiliser. The dew point is set at 4°C but can be changed at any value between 1°C and 15°C. The condensate that is formed should be removed by a peristaltic pump, automatic drain or collection vessel.
3 possible exchanger materials: Glass body with PTFE head; PVDF body with PTFE head or completely out of stainless steel.
The digital controlled cooler has many control and warning features like programmable alarms, mA-output, digital inputs and Modbus or RS485 communication.
The alarm status changes when the temperature deviates by ± 3°C from the set point.
Available for 230VAC and 115VAC power supply.
Ankersmid electronically controlled Peltier cooler incorporates a unique design of demountable heat exchangers. This versatile design creates many possibilities. One of the important available features is the humidification of calibration gases to avoid volumetric errors.Humidification is achieved with a special inlet for liquids. During calibration the heat exchanger dries out due to the dry calibration gas; this volumetric change is important for reference measurements. Injection of liquid during calibration can avoid this issue.